Nano Coatings

Applications

• Interior Upholstery
• Sofas and Couches
• Carpets and Rugs
• Curtains
• Sneakers and Shoes
• Ethnic Apparels
• Handbags
• Sportswear

Advantages

• Excellent Water Repelling Properties
• Long Lasting and durable
• Maintains the original texture of the fabrics.
• No odour after curing
• Easy Application with spraying
• UV Resistant and outdoor durability
• Invisible layer after drying
• Durability upto 12 months

How To Apply

• Surface Preparation – Make surface clean of dust, dirt, oil and stains
• Shake Winone Fabguard well before use.
• Fabguard can be applied by mist spray, aerosol and spray machines.
• Apply 2 coats on dry surface till saturation with spraying.
• Let the surface dry and cure up to 24 hrs

Application Tools

Can be applied using

• Mist Spray
• Aerosol Bottles
• Electric Spray Gun

Storage

• Store the Coating is a Clean and Dry place.
• Best Use before 12 months from the Date of Manufacturing.

Health And Safety

• Respiratory Protection – Use under normal conditions with adequate ventilation, no special respiratory protection is required for water based version. For Solvent based version, apply in well ventilated areas
• Hand protection – Use latex gloves while application
• Skin Protection – No specific protection required
• Eye protection – Use protective eye gear while application
• If swallowed, contact your nearest doctor immediately.

Mixing Ratio & Coverage

• Solvent based – Ready to Use

Coverage:

• a Solvent-based = 4-5 Sq mt
• It might vary according with fabric porosity

Technical Specifications

• Physical State- Liquid
• Appearance- Transparent
• Odour-Nil
• Ph- 5.0 1–0.5
• Boiling Point- not determined
• flash point-above 62 degree
• Solvent based – Ready to Use

Coverage:

• Solvent-based = 4-5 Sq mt
• It might vary according with fabric porosity

Key Features

• Beading Effect on any surface
• Non Film Forming, retains original texture
• Available in Solvent base

Applications

• External / Internal Plaster
• Stone Facade
• Red Agra, Dholpur Stone
• Laterite, Mandan Stone
• Exposed Concrete Facade
• Brick Facade

Advantages

• Excellent Water Repelling Properties
• Long Lasting > 5 years
• Prevents Ingress of water borne chlorides and sulphates
• Doesn’t block breathability
• No Peeling off or Erosion
• Prevents Efflorescence
• UV Resistant
• Invisible layer after drying
• Prevents growth of Moss

Mixing Ratio & Coverage

• Water based – Mix with water In ratio 1:8 to 1:10 dilution. Use good quality, potable water only.
• Solvent based Ready to Use

Coverage:

• Water-based = 4-5 Sq mt
• a Solvent-based = 4-5 Sq mt

How To Apply

• Surface Preparation – Make surface clean of dust, dirt, oil and stains
• To remove Efflorescence, Fungus / Mold, use Winone Biowash to clean the surface.
• Shake Winone Aquafence well before use and dilute
• Apply on dry surface till saturation
• Let the surface dry and cureup to 72 hrs

Application Tools

Can be applied using –

• Brush
• Roller
• Low Pressure Sprayer

Storage

• Store the Coating is a Clean and Dry place.
• Best Use before 12 months from the Date of Manufacturing

Health And Safety

• Respiratory Protection – Use under normal conditions with adequate ventilation, no special respiratory protection is required for water based version. For Solvent based version, apply in well ventilated areas
• Hand protection – Use latex gloves while application
• Skin Protection – No specific protection required
• Eye protection – Use protective eye gear while application
• If swallowed, contact your nearest doctor immediately.

Technical Specifications

• Physical State – Liquid
• Appearance – Transparent
• Odour – Nil
• Ph – 5.0 1–0.5
• Boiling Point- 100 Deg. C
• Specific Gravity – 1.0 +-0.1
• flash point – above 62 degree
• UV – Resistant
• VOC – <2gms/ltr

Health And Safety

• Respiratory Protection – Use under normal conditions with adequate ventilation, no special respiratory protection is required for water based version. For Solvent based version, apply in well ventilated areas
• Hand protection – Use latex gloves while application
• Skin Protection – No specific protection required
• Eye protection – Use protective eye gear while application
• If swallowed, contact your nearest doctor immediately

Key Features

• Beading Effect on any surface
• Non Film Forming, retains original texture
• Available in Water and Solvent base

Applications

• External Furniture
• Wooden Decks and Cabin
• Natural Uncoated wooden structures
• Exposed Wooden structures
• Exposed Wooden Facade

Advantages

• Excellent Water Repelling Properties
• Long Lasting > 5 years
• Prevents ingress of water borne chlorides and sulphates
• Doesn’t block breathability
• No Peeling off or Erosion
• Prevents deterioration of wooden structures due to water ingress and decay
• UV Resistant
• Invisible layer after drying
• Prevents growth of Moss, fungus and ,mildew

Mixing Ratio & Coverage

• Solvent based – Ready to Use

Coverage:

• a Solvent-based = 4-5 Sq mt

How To Apply

• Surface Preparation – Make surface clean of dust, dirt, oil and stains
• To remove Fungus / Mold, use Winone Biowash to clean the surface.
• Shake Winone woodguard well before use and dilute.
• Apply on dry surface till saturation.
• Let the surface dry and cure up to 72 hrs.

Application Tools

Can be applied using –

• Brush
• Roller
• Low Pressure Sprayer

Storage

• Store the Coating is a Clean and Dry place.
• Best Use before 12 months from the Date of Manufacturing

Health And Safety

Respiratory Protection – Use under normal conditions with adequate ventilation, no special respiratory protection is required for water based version. For Solvent based version, apply in well ventilated areas

• Hand protection – Use latex gloves while application
• Skin Protection – No specific protection required
• Eye protection – Use protective eye gear while application
• If swallowed, contact your nearest doctor immediately.

Key Features

• Beading Effect on any surface
• Non Film Forming, retains original texture
• Available in Solvent base